The ADJ Mega Tripar Profile Plus is a compact, low profile par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique “sit-flat” design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear.
The Mega Tripar Profile Plus features 5 x 4-Watt, 4-N-1 RGB + UV LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGB + UV Dimmer Mode, Auto Run Mode, & Static Color Mode), and has 5 DMX Channel modes for a variety of programming options. Users can also use the ADJ LED RC wireless remote, which is sold separately, to control the Mega Tripar Profile Plus.
60° 1000 W active 15" (380 mm) 2-way loudspeaker system
Yoke mount for the AcousticDesign AD-S8T loudspeaker.
Console with monitor; Stage rack w/3DSP Mix Engine Cards, 48 analog mic/line in x 24 analog line out, ECx Ethernet Option card, FWx FireWire Option card, extra FOH Snake card. Plugins: VenuePack, McDSP Live, Waves Live
Robe's super fast ROBIN® LED Beam 100 is the ultimate effects lighting tool.
A highly optimized motorised control produces speedy pan and tilt movement, three LED zones allow the creation of various colour chases, and the extra punchy 7 degree beam angle can be amplified with fast strobing. Simplified control via pre-programmed of colours, colour chases and effects on a virtual colour wheel and various strobing and pulsing effects allow quick and easy programming.
The QSC AcousticPerformanceTM AP-5122 is a professional, two-way, full-range loudspeaker ideal for a variety of installed sound reinforcement applications requiring higher SPL output and a clean appearance. The AP-5122 uses a high power-capacity, 76mm (3-inch) diaphragm compression driver and combines it with a 305mm (12-inch) woofer to deliver exceptional
full bandwidth reproduction.
The SPA Series amplifiers from are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel into 4Ω and 8Ω. These amps can also be bridged to supply 200 watts into 4Ω and 8Ω, and up to 250 watts into 70V or 100V loads making them extremely flexible for Low-Z or High-Z applications. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality. The SPA2-60 and SPA4-60 are housed in an unobtrusive black painted 1/2 RU chassis with unique mounting hardware enabling rack, table and wall mounting capabilities.
2.75-inch Small Format Surface Satellite Loudspeaker
The AD-S.SAT is part of the AcousticDesign™ Series SUB/SAT loudspeaker solution, which is ideally suited for background music applications that require depth and clarity even at lower volume settings. The AcousticDesign Series SUB/SAT loudspeakers are specifically designed to be mix-and-match capable; meaning any combination of satellites may be paired with any subwoofer in the AD Series SUB/SAT line.
LED Fresnel FC and Tunable White, to replace a 300W lamp
The QSC K.2 Series™ represents the best-in-class loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.
- Innovatively designed metal housing in MIPRO’s distinctive aesthetic and ergonomic style.
- Basic sterling gray color with other custom-made colors optional.
- Turn upper housing for 2 AA battery installation and replacement.
- Interchangeable capsule module with premium condenser or dynamic options for easy and fast changeovers.
- The unique multi-layered metal grille protects the capsule against impact, rolling and pop noise, ensuring clarity of sound.
- Backlit LCD displays all operational parameter information.
- Five selectable gain settings with microphone input sensitivity of 0 dB.
- Switchable Manual /Disable audio mute options.
- Switchable High/Low power options.
- The bottom housing with built-in high-efficiency antenna features power switch, mute and setup buttons for programmable gain, limiter, low-cut and RF output power.
- Patented end-cap covers with color-coded channel identification clips. Detach the end-cap cover for parameter set-up.
- Reversible end-cap allows shielding of power on/off or mute switches during performance.
- High-efficiency circuitry design provides 12~14 hours of operation from 2 AA batteries (depending on the battery quality).
The QSC GXD 8 DSP PA Power Amplifier is a professional standard 2 x 1200 Watt at 4 Ohms Class D PA power Amplifier featuring onboard DSP filters, effects and EQ; ideal for pro PA installations.
Soft, padded cover made with weather-resistant, heavy-duty Nylon/Cordura® material for KS112.
With a powerful engine built into a compact frame, this system is built for productions on the go.
The white AcousticCoverage Series QSC AC-S4T is a pair of transformer-equipped 4" surface-mount loudspeakers voiced to deliver enhanced clarity in the vocal range, making them suitable for 70/100V or 8-ohm operation in a variety of paging, A/V conferencing, and background music applications.
Powder coated steel yoke for mounting the K12.2 vertically or horizontally to walls, beams, or other structures.
Q-SYS network ceiling-mount loudspeaker
The Q-SYS NL-C4 is a network PoE loudspeaker that delivers clear speech and music reproduction natively to Q-SYS. The ceiling-mount loudspeaker features a four-inch, full-range driver, and can be integrated into your space with a single Ethernet cable to reduce overall hardware footprint and lower system cost. As a native Q-SYS Product, you can take advantage of the drag-and-drop integration and simple control capabilities offered by Q-SYS.
The CD-01U is an extremely compact CD player available as a standard or professional version. The 19" casing of the CD-01U comprises a clearly legible display and durable CD drive buttons, a slot-loading drive which reads standard audio CDs (CD-R and CD-RW), as well as MP3-CDs with a diameter of 8 and 12 cm.
Power amplifier, Two-channel 2x 300 W 4 OHM
43-inch FULL HD LCD Display, brightness 350 cd/m2
The QSC K10 TOTE Soft Tote Bag (Black) is a weather-resistant, heavy-duty Cordura nylon bag designed to carry and protect a K10 active loudspeaker. It has a pocket in front for wires and cables. The tote is carried by 2 strap handles with an overlapping grip.
Yoke mount for the AcousticDesign AD-S8T loudspeaker.
UR4D+ receivers are part of the flagship UHF-R system and provide single and dual-channel options for premium wireless. As "+"-versions these receivers include RF distribution ports that allow up to 10 receivers to share the RF signal from a single pair of antennas.
The QSC MP-M music and paging mixers are fixed architecture mixer/processors offering unprecedented capabilities combined with ease of configuration and operation. The products are intended for retail and hospitality applications in which high-quality audio from various sources is routed to multiple zones. Live mixing functions are also supported for applications requiring reinforcement of entertainment, presentations or conferences.
2.75-inch Small Format Ceiling Satellite Loudspeaker
The AD-C.SAT is part of the AcousticDesign™ Series SUB/SAT loudspeaker solution, which is ideally suited for background music applications that require depth and clarity even at lower volume settings. The AcousticDesign Series SUB/SAT loudspeakers are specifically designed to be mix-and-match capable; meaning any combination of satellites may be paired with any subwoofer in the AD Series SUB/SAT line.
- Consistent tonal characteristics across the entire AcousticDesign™ family in both surface or ceiling applications
- Directivity Matched Transition® (DMT) waveguide ensures smooth, uniform frequency response over the coverage area
- Snap-fit magnetic grille
- 3x double stepped, long travel dog-ear blind mount system
- Advanced Intrinsic Correction™ voicings available via Q-SYS™
- Low-saturation and low-loss 70/100V transformers with 16Ω bypass
- Blemish-free removable logo
- Removable conduit cover plate, also available as accessory for pre-install wiring
- Available in black (RAL 9011) or white (RAL 9010)
- Complete EASE, CF2, CAD, & BIM information available online
Made from heavy duty Nylon/Cordura, the QSC KLA181 Cover is designed to protect your KLA181 subwoofer from dust, dirt, and moisture when not in use. The cover has hook-and-loop fastening flaps for accessing the built-in handles of the KLA181 for ease in transport.
LED Fresnel FC and Tunable White with colour correction, to replace 650W lamp
Soft, padded cover made with heavy-duty Nylon/Cordura® material for KW122.
5x40W moving head linear, pivot, mirror and pixel effect
he Roland S-2416 digital snake stage unit expands the line-up by offering a 24 input x 16 output analog and 8 input x 8 output digital, for a total of 32 input and 24 output channels. In addition to the analog and digital I/O the S-2416 has two REAC ports enabling the ability to cascade an additional snake for expanded I/O or for a fully redundant, zero-loss audio back-up solution. In addition, the discrete mic preamps are newly developed high-grade ensuring highest-quality uncolored sound.
Multi-Channel Amplifier
The MP-A Series music and paging amplifiers build on a 50-year legacy of amplifier dependability and quality. The MP-A Series offers an incredible amount of flexibility for business music and paging applications, while maintaining high efficiency and low total cost of ownership.
Powder coated steel yoke for mounting the K8 vertically or horizontally to structures.
Bass combo with 4x10" drivers, 350W
Aluminum Array Frame for KLA Series Enclosures
The AD-S.SAT is part of the AcousticDesign™ Series SUB/SAT loudspeaker solution, which is ideally suited for background music applications that require depth and clarity even at lower volume settings. The AcousticDesign Series SUB/SAT loudspeakers are specifically designed to be mix-and-match capable; meaning any combination of satellites may be paired with any subwoofer in the AD Series SUB/SAT line.
The premier UR2 transmitter with the legendary Beta 58A offers excellent sound for professional vocal performances
Stormy CC innovates tradition since it uses the latest LED technology, but retains all the charm of a classic strobe. The light source is a strip of powerful RGBW LEDs. The flash effect is actually enhanced since the Stormy CC is equipped with a parabolic reflector, like a classic strobe, and does not project the light directly forwards like other LED strobes do.
Q-SYS Network Mic/Line I/O Expanders
The Q-SYS QIO Series network audio I/O expanders extend your Q-SYS system’s capabilities and enable streamlined interoperability with non-networked audio devices. By separating local I/O from processing hardware, the QIO Series offer modular and easily scalable network I/O to support your desired topology. There are three models that offer mic/line connectivity to integrate consumer or professional audio devices into your Q-SYS system.
12x8W RGBW/FC high-efficiency LED source
- 8-inch 2-way, 90° conical DMT™
- AD-C820 speaker baffle
- AD-C800BB Backcan assembly
- AD-C800RG Round grille (white, paintable)
Multi-Channel Amplifier
The MP-A Series music and paging amplifiers build on a 50-year legacy of amplifier dependability and quality. The MP-A Series offers an incredible amount of flexibility for business music and paging applications, while maintaining high efficiency and low total cost of ownership.
Battery operated LED pixel batten
43-inch FULL HD LCD Display, brightness 350 cd/m2
7,000 lumens, WUXGA, DLP laser phosphor projector
- Great image quality
- Optimal integration capabilities
- Guaranteed service and support
Sold together with Barco R9801840 G-Lens (0,75-0,95:1)
Projector datasheet link provided below for detailed technical information about this product.
Console with monitor; Stage rack w/3DSP Mix Engine Cards, 48 analog mic/line in x 24 analog line out, ECx Ethernet Option card, FWx FireWire Option card, extra FOH Snake card. Plugins: VenuePack, McDSP Live, Waves Live
10" high performance 2-way active loudspeaker
12" high performance 2-way active loudspeaker
The Event Bar Q4 LED pinspot is an easy to use DMX controlled or Sound Active scanning system utilizing four quad color LED heads. With individual dimming and strobe, the Event Bar Q4 from ADJ provides superb lighting across a large area.
65-inch FULL HD LCD Display, brightness 350 cd/m2
This 1500 W moving head is the most impressive graphic effects spotlight available, with an incredible array of colour and imagery devices, including 20 gobos on 3 wheels, animation disc, rotating prism and the exclusive Automated-Star-Gobo (patent pending). All devices are fully combinable with limitless rotation and morphing possibilities. The zoom has an extreme aperture range from 7° to 57° (1:8 ratio) with an amazing 120 bpm speed. An auto-focusing function combined with the Dyna-Cue-Creator make programming and operation easy and creative. A special high definition iris, the advanced Zoom-Tracking-Diffuser and silent operation position Alpha HPE 1500 at the edge of show-lighting technology.
With a powerful engine built into a compact frame, this system is built for productions on the go.
directional loudspeaker
Directional loudspeaker. Delivers focused sound dispersion perfect for one or two listeners. Speaker automatically monitors ambient noise and self-adjusts volume accordingly.
Wash colour changers (2 pcs)
Set: Two DJ CD players together with transport case
Pair of flush mount 2-way installation loudspeakers with 4" driver
Bass combo with 4x10" drivers, 350W
