The QSC K10 TOTE Soft Tote Bag (Black) is a weather-resistant, heavy-duty Cordura nylon bag designed to carry and protect a K10 active loudspeaker. It has a pocket in front for wires and cables. The tote is carried by 2 strap handles with an overlapping grip.
|
Cyclone 55.1 |
- Passive dual 5” two-way surface mount loudspeaker
- Compact fibreglass enclosure
- Non-resonant structure
- Wide dispersion pattern
- Marine-grade stainless steel fittings
- UV-resilient paint
- Weather-protected with an IP-55 rating (BS EN 60529:1992 +A2:2013)
|
|
Cyclone 2081 powered subwoofer |
||
- Powered loudspeaker with 600 W integrated amplifier module
- Two 150 W outputs (4 Ω) via Phoenix connector.
- 24 Bit, 48 kHz DSP with 4 onboard preset banks
- Compatible with Void speaker preset library and ArmoníaPlus software
- Combination XLR and ¼” jack inputs with Phoenix outputs
- Reflex loaded dual 8” low frequency loudspeaker
- Tough, high excursion transducers with 2” voice coil
- Stylised design in a low resonance fibreglass enclosure
The AcousticDesign™ AD-P6T is a 6.5-inch two-way pendant-mount loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16Ω bypass configurations.
The QSC AcousticPerformanceTM AP-5122 is a professional, two-way, full-range loudspeaker ideal for a variety of installed sound reinforcement applications requiring higher SPL output and a clean appearance. The AP-5122 uses a high power-capacity, 76mm (3-inch) diaphragm compression driver and combines it with a 305mm (12-inch) woofer to deliver exceptional
full bandwidth reproduction.
The AD-S.SAT is part of the AcousticDesign™ Series SUB/SAT loudspeaker solution, which is ideally suited for background music applications that require depth and clarity even at lower volume settings. The AcousticDesign Series SUB/SAT loudspeakers are specifically designed to be mix-and-match capable; meaning any combination of satellites may be paired with any subwoofer in the AD Series SUB/SAT line.
Made from heavy duty Nylon/Cordura, the QSC KLA181 Cover is designed to protect your KLA181 subwoofer from dust, dirt, and moisture when not in use. The cover has hook-and-loop fastening flaps for accessing the built-in handles of the KLA181 for ease in transport.
- Best in class audio performance
- 2000 Watt Class-D amplifier module
- Intrinsic Correction™ tuning and loudspeaker management
- Directivity Matched Transition® (DMT) design provides excellent power response and consistent performance across the listening area
- Refined, professional appearance looks great in any application
- Rugged ABS enclosure for long life and lasting durability
- Deployment in either main PA or floor monitor position
- Factory Presets and savable/recallable Scenes for commonly-used application
- Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
- Dual pole cup mounts (standard and 7.5 degree down-tilt)
- M10 fittings for flown applications
- Optional security panel prevents unauthorized tampering of controls
- Complete EASE and CAD information available online
About this item
- Soft padded carrying tote
- Designed for the KLA12 Loudspeaker
- Made with heavy-duty Nylon/Cordura material
- Added protection helps prevent dings and dents
- Exterior pocket for storage of cables and other accessories
Robe's super fast ROBIN® LED Beam 100 is the ultimate effects lighting tool.
A highly optimized motorised control produces speedy pan and tilt movement, three LED zones allow the creation of various colour chases, and the extra punchy 7 degree beam angle can be amplified with fast strobing. Simplified control via pre-programmed of colours, colour chases and effects on a virtual colour wheel and various strobing and pulsing effects allow quick and easy programming.
he MP-A Series music and paging amplifiers build on a 50-year legacy of amplifier dependability and quality. The MP-A Series offers an incredible amount of flexibility for business music and paging applications, while maintaining high efficiency and low total cost of ownership.
4" surface mount installation loudspeaker, black
Column Surface-Mount Loudspeaker
The AcousticDesign™ Series AD-S402T is a 4-driver column surface-mount loudspeaker. This premium full range system is capable of 70 V / 100 V or 16 ohm bypass loads, making it ideal for a wide variety of foreground and background applications with acoustically challenged environments. Equipped with a unique pan/tilt mounting system, the column surface-mount loudspeakers offer multiple positioning locations allowing the loudspeaker to remain close to the wall while delivering up to -20° downward tilt.
Multi-Channel Amplifier
The MP-A Series music and paging amplifiers build on a 50-year legacy of amplifier dependability and quality. The MP-A Series offers an incredible amount of flexibility for business music and paging applications, while maintaining high efficiency and low total cost of ownership.
- The unidirectional capsule unit reduces environmental noise, increases the S/N ratio and improves sound clarity.
- Clear and brilliant sound. High fidelity, wide range, high dynamic range, and rapid transient response for true natural sound reproduction.
- High dynamic range and low distortion.
- Standard MIPRO Mini XLR plug, and other plug types can be requested upon availability.
The AcousticDesign™ AD-P6T is a 6.5-inch two-way pendant-mount loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16Ω bypass configurations.
Yoke mount for the AcousticDesign AD-S8T loudspeaker.
ALL-IN-ONE HD AV MIXER WITH BUILT-IN USB 3.0 FOR WEB STREAMING AND RECORDING
The SPA Series amplifiers from are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel into 4Ω and 8Ω. These amps can also be bridged to supply 200 watts into 4Ω and 8Ω, and up to 250 watts into 70V or 100V loads making them extremely flexible for Low-Z or High-Z applications. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality. The SPA2-60 and SPA4-60 are housed in an unobtrusive black painted 1/2 RU chassis with unique mounting hardware enabling rack, table and wall mounting capabilities.
65-inch FULL HD LCD Display, brightness 350 cd/m2
The QSC GXD 8 DSP PA Power Amplifier is a professional standard 2 x 1200 Watt at 4 Ohms Class D PA power Amplifier featuring onboard DSP filters, effects and EQ; ideal for pro PA installations.
Bass combo with 4x10" drivers, 350W
Column Surface-Mount Loudspeaker
The AcousticDesign™ Series AD-S402T is a 4-driver column surface-mount loudspeaker. This premium full range system is capable of 70 V / 100 V or 16 ohm bypass loads, making it ideal for a wide variety of foreground and background applications with acoustically challenged environments. Equipped with a unique pan/tilt mounting system, the column surface-mount loudspeakers offer multiple positioning locations allowing the loudspeaker to remain close to the wall while delivering up to -20° downward tilt.
12x8W RGBW/FC high-efficiency LED source
High-Power, 12-inch 2-way, 90˚ conical DMT™
The ADJ Mega Tripar Profile Plus is a compact, low profile par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique “sit-flat” design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear.
The Mega Tripar Profile Plus features 5 x 4-Watt, 4-N-1 RGB + UV LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGB + UV Dimmer Mode, Auto Run Mode, & Static Color Mode), and has 5 DMX Channel modes for a variety of programming options. Users can also use the ADJ LED RC wireless remote, which is sold separately, to control the Mega Tripar Profile Plus.
Steel yoke mount for the AD-S12 loudspeaker.
With a powerful engine built into a compact frame, this system is built for productions on the go.
2x Passive 8" Two-Way Loudspeakers &
Self-Powered, 10" Low Frequency Enclosure
The Antari M-Series Stage Fogger is ideal for large concerts, movie production, fire training purpose and especially for touring applications, as well as any venue where ultimate performance, ease of use and dependability are specified.
The QSC GXD 4 Power Amplifier is designed for professional PA systems utilizing speakers with 4 and 8 ohm loads and a maximum output of 1600W.
Q-SYS network + analog I/O processor
The Core 8 Flex audio, video and control (AV&C) processor extends the applications of the Q-SYS Platform into a wider range of smaller-scale installations across corporate, higher education, healthcare and beyond. Built on the same foundational technologies and driven by the same Q-SYS OS as the rest of the Q-SYS processor portfolio, including the best-in-class Q-SYS Core 110f, Core 8 Flex is designed for applications with lower network or analog channel capacity and/or targeted processing requirements.
Yoke mount for the AcousticDesign AD-S8T loudspeaker.
Soft, padded cover made with weather-resistant heavy-duty Nylon/Cordura® material for KS212C.
Features
- Power levels matched to the most popular speakers used by entertainers
- Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
- Inputs: XLR, 1/4-inch TRS and phono input connectors for compatibility with any source
- Outputs: Speakon® combo accepts, 1/4-inch (TS) plugs or Speakon 2-pole and 4-pole plugs (connects two poles only). Binding posts support all other speaker wiring systems
- Minimum depth chassis (10.1-inch / 257 mm) fits in compact, inexpensive effects racks
- Lightweight - GX3 and GX5 less than 26 lb (12.5 kg). GX7 only 15.5 lb (7 kg)*
- Detented gain controls for precise setting and matching of sensitivity
- GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
- Front panel LEDs monitor power, signal and clipping
- Subwoofer/satellite crossover built-in
* 230V 16.5 lb (7.5 kg)
The SPA4-100 four channel amplifier delivers 100 watts rms per channel into 4 or 8 ohms; the four channels can also be bridged in pairs, each pair providing up to 200 watts rms into 4 or 8 ohms. The SPA4-100 bridged pair channels can be switched into 70V or 100V direct drive mode providing up to 350 watts rms into a 70V or 100V output; when in 70V or 100V mode the 80Hz highpass filter is automatically engaged.
The QSC GX7 is a light weight power amp which provides professional audio quality, meticulous engineering, precision manufacturing and long-term reliability. Add contemporary styling, multiple input/output options, light weight, and advanced protection circuitry, and the GX7 clearly represents real value.
Multi-channel processing amplifier. Flexible Amplifier Summing Technology (FAST) drives most any loudspeaker system or configuration by distributing total amplifier power across one, two, three or all four channels.
Dual-capsule kick microphone with cable and case
4.5-inch, 2-way, 150° conical DMT™
The AcousticDesign™ AD-P4T is a 4.5-inch two-way pendant-mount loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16Ω bypass configurations.
Battery operated LED pixel batten
|
|
System Package A - BLACK Includes 1 x IT5914 Cyclone 208i powered subwoofer plus 4 x IT3692 Cyclone 4 loudspeakers |
||
Audio Perfection Presented in an Ultra-Compact IP-55 Rated Enclosure
Cyclone 4 is the latest addition to this extremely popular range. With its beautifully sculpted, weather-protected casing, UV resilient paint and marine grade aluminium bracket, Cyclone 4 is the perfect audio solution for all-weather applications.
Q-SYS Network Mic/Line I/O Expanders
The Q-SYS QIO Series network audio I/O expanders extend your Q-SYS system’s capabilities and enable streamlined interoperability with non-networked audio devices. By separating local I/O from processing hardware, the QIO Series offer modular and easily scalable network I/O to support your desired topology. There are three models that offer mic/line connectivity to integrate consumer or professional audio devices into your Q-SYS system.
The AD-S.SUB is part of the AcousticDesign™ Series SUB/SAT loudspeaker solution, which is ideally suited for background music applications that require depth and clarity even at lower volume settings. The AcousticDesign Series SUB/SAT loudspeakers are specifically designed to be mix-and-match capable; meaning any combination of satellites may be paired with any subwoofer in the AD Series SUB/SAT line.
The white AcousticCoverage Series QSC AC-S4T is a pair of transformer-equipped 4" surface-mount loudspeakers voiced to deliver enhanced clarity in the vocal range, making them suitable for 70/100V or 8-ohm operation in a variety of paging, A/V conferencing, and background music applications.
The premier UR2 transmitter with the legendary Beta 58A offers excellent sound for professional vocal performances
Battery operated LED pixel batten
43-inch FULL HD LCD Display, brightness 350 cd/m2
7,000 lumens, WUXGA, DLP laser phosphor projector
- Great image quality
- Optimal integration capabilities
- Guaranteed service and support
Sold together with Barco R9801840 G-Lens (0,75-0,95:1)
Projector datasheet link provided below for detailed technical information about this product.
Console with monitor; Stage rack w/3DSP Mix Engine Cards, 48 analog mic/line in x 24 analog line out, ECx Ethernet Option card, FWx FireWire Option card, extra FOH Snake card. Plugins: VenuePack, McDSP Live, Waves Live
10" high performance 2-way active loudspeaker
12" high performance 2-way active loudspeaker
The Event Bar Q4 LED pinspot is an easy to use DMX controlled or Sound Active scanning system utilizing four quad color LED heads. With individual dimming and strobe, the Event Bar Q4 from ADJ provides superb lighting across a large area.
65-inch FULL HD LCD Display, brightness 350 cd/m2
This 1500 W moving head is the most impressive graphic effects spotlight available, with an incredible array of colour and imagery devices, including 20 gobos on 3 wheels, animation disc, rotating prism and the exclusive Automated-Star-Gobo (patent pending). All devices are fully combinable with limitless rotation and morphing possibilities. The zoom has an extreme aperture range from 7° to 57° (1:8 ratio) with an amazing 120 bpm speed. An auto-focusing function combined with the Dyna-Cue-Creator make programming and operation easy and creative. A special high definition iris, the advanced Zoom-Tracking-Diffuser and silent operation position Alpha HPE 1500 at the edge of show-lighting technology.
With a powerful engine built into a compact frame, this system is built for productions on the go.
Directional loudspeaker. Delivers focused sound dispersion perfect for one or two listeners. Speaker automatically monitors ambient noise and self-adjusts volume accordingly.
directional loudspeaker
Wash colour changers (2 pcs)
Pair of flush mount 2-way installation loudspeakers with 4" driver
Set: Two DJ CD players together with transport case
Bass combo with 4x10" drivers, 350W
