Features
- Power levels matched to the most popular speakers used by entertainers
- Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
- Inputs: XLR, 1/4-inch TRS and phono input connectors for compatibility with any source
- Outputs: Speakon® combo accepts, 1/4-inch (TS) plugs or Speakon 2-pole and 4-pole plugs (connects two poles only). Binding posts support all other speaker wiring systems
- Minimum depth chassis (10.1-inch / 257 mm) fits in compact, inexpensive effects racks
- Lightweight - GX3 and GX5 less than 26 lb (12.5 kg). GX7 only 15.5 lb (7 kg)*
- Detented gain controls for precise setting and matching of sensitivity
- GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
- Front panel LEDs monitor power, signal and clipping
- Subwoofer/satellite crossover built-in
* 230V 16.5 lb (7.5 kg)
Steel yoke mount for the AD-S12 loudspeaker.
Accessory Wall Mount Bracket for PTZ Camera, NC-12x80 and NC-20x60.
The AcousticDesign™ AD-P6T is a 6.5-inch two-way pendant-mount loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16Ω bypass configurations.
440W IP65 moving beam light with colour mixing
The QSC AcousticPerformanceTM AP-5122 is a professional, two-way, full-range loudspeaker ideal for a variety of installed sound reinforcement applications requiring higher SPL output and a clean appearance. The AP-5122 uses a high power-capacity, 76mm (3-inch) diaphragm compression driver and combines it with a 305mm (12-inch) woofer to deliver exceptional
full bandwidth reproduction.
The SPA4-100 four channel amplifier delivers 100 watts rms per channel into 4 or 8 ohms; the four channels can also be bridged in pairs, each pair providing up to 200 watts rms into 4 or 8 ohms. The SPA4-100 bridged pair channels can be switched into 70V or 100V direct drive mode providing up to 350 watts rms into a 70V or 100V output; when in 70V or 100V mode the 80Hz highpass filter is automatically engaged.
6.5-inch Dual Voice Coil, Small Format Surface Subwoofer
The AD-S.SUB is part of the AcousticDesign™ Series SUB/SAT loudspeaker solution, which is ideally suited for background music applications that require depth and clarity even at lower volume settings. The AcousticDesign Series SUB/SAT loudspeakers are specifically designed to be mix-and-match capable; meaning any combination of satellites may be paired with any subwoofer in the AD Series SUB/SAT line.
|
Cyclone 55.1 |
- Passive dual 5” two-way surface mount loudspeaker
- Compact fibreglass enclosure
- Non-resonant structure
- Wide dispersion pattern
- Marine-grade stainless steel fittings
- UV-resilient paint
- Weather-protected with an IP-55 rating (BS EN 60529:1992 +A2:2013)
|
|
Cyclone 2081 powered subwoofer |
||
- Powered loudspeaker with 600 W integrated amplifier module
- Two 150 W outputs (4 Ω) via Phoenix connector.
- 24 Bit, 48 kHz DSP with 4 onboard preset banks
- Compatible with Void speaker preset library and ArmoníaPlus software
- Combination XLR and ¼” jack inputs with Phoenix outputs
- Reflex loaded dual 8” low frequency loudspeaker
- Tough, high excursion transducers with 2” voice coil
- Stylised design in a low resonance fibreglass enclosure
Eight-channel Network Amplifier for the Q-SYS Platform
Q-SYS CX-Q Series network amplifiers combine a legacy of robust power amplifiers, advancements in high-efficiency output devices and native network transport, control and monitoring capabilities. CX-Q 4K8 features eight channels, capable of delivering customized power output loading and a total maximum power of up to 4000 W. Low-Z, 70 V or 100 V direct drive are available on all channels.
The QSC GX7 is a light weight power amp which provides professional audio quality, meticulous engineering, precision manufacturing and long-term reliability. Add contemporary styling, multiple input/output options, light weight, and advanced protection circuitry, and the GX7 clearly represents real value.
The AcousticDesign™ AD-P6T is a 6.5-inch two-way pendant-mount loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16Ω bypass configurations.
12x8W RGBW/FC high-efficiency LED source
2.75-inch Small Format Ceiling Satellite Loudspeaker
The AD-C.SAT is part of the AcousticDesign™ Series SUB/SAT loudspeaker solution, which is ideally suited for background music applications that require depth and clarity even at lower volume settings. The AcousticDesign Series SUB/SAT loudspeakers are specifically designed to be mix-and-match capable; meaning any combination of satellites may be paired with any subwoofer in the AD Series SUB/SAT line.
The robust UR1 Bodypack Transmitter, part of the Flagship UHF-R wireless series is the standard for professional performance and can be used with headworn, lavalier, instrument microphones, or with guitars or basses.
The QSC MP-M music and paging mixers are fixed architecture mixer/processors offering unprecedented capabilities combined with ease of configuration and operation. The products are intended for retail and hospitality applications in which high-quality audio from various sources is routed to multiple zones. Live mixing functions are also supported for applications requiring reinforcement of entertainment, presentations or conferences.
Cyclone 4
Audio Perfection Presented in an Ultra-Compact IP-55 Rated Enclosure
Cyclone 208i
Dual 8” Powered Subwoofer with DSP Control and IP10 rating
Powered Line Array Loudspeaker 12-inch 2-way
The LA112 is a next-generation, intelligent, active line array loudspeaker featuring a brilliant combination of leading-edge innovation, refined engineering and unparalleled ease of use in an easy-to-deploy package.
Delivering extraordinary audio experiences and exceptional performance via system intelligence and premium components, the LA112 is the result of a deep understanding of customer needs and application requirements. The LA112 is easy to configure and deploy for applications ranging from simple, portable, plug-and-play setups, to demanding, networked, high-tech AV productions and fixed installations. Solo entertainers, installers and production companies will value its intuitive splay angle adjustment and array optimization, as well as its flexible interoperability with networked audio systems (Dante®).
Deployed using dedicated array frame, ground-stacked (array frame combined with optional sub-stack adapters), or mounted using loudspeaker stand/pole, the LA112 loudspeaker also features daisy-chain connections for analog, digital audio and AC power (PowerCON TRUE1).
Pair of surface mount installation loudspeakers, 6"
With a powerful engine built into a compact frame, this system is built for productions on the go.
- Best in class audio performance
- 2000 Watt Class-D amplifier module
- Intrinsic Correction™ tuning and loudspeaker management
- Directivity Matched Transition® (DMT) design provides excellent power response and consistent performance across the listening area
- Refined, professional appearance looks great in any application
- Rugged ABS enclosure for long life and lasting durability
- Deployment in either main PA or floor monitor position
- Factory Presets and savable/recallable Scenes for commonly-used application
- Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
- Dual pole cup mounts (standard and 7.5 degree down-tilt)
- M10 fittings for flown applications
- Optional security panel prevents unauthorized tampering of controls
- Complete EASE and CAD information available online
|
|
System Package A - BLACK Includes 1 x IT5914 Cyclone 208i powered subwoofer plus 4 x IT3692 Cyclone 4 loudspeakers |
||
Audio Perfection Presented in an Ultra-Compact IP-55 Rated Enclosure
Cyclone 4 is the latest addition to this extremely popular range. With its beautifully sculpted, weather-protected casing, UV resilient paint and marine grade aluminium bracket, Cyclone 4 is the perfect audio solution for all-weather applications.
The ADJ Dotz Par uses advanced COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no RGB shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches. The COB LED engine on the Dotz Par is a TRI 36W (3-In-1).
Q-SYS QIO-ML4I Daisy-Chainable Peripheral with 4 Mic/Line Inputs
The Q-SYS QIO Series network audio I/O expanders extend your Q-SYS system’s capabilities and enable streamlined interoperability with non-networked audio devices. By separating local I/O from processing hardware, the QIO Series offer modular and easily scalable network I/O to support your desired topology. There are three models that offer mic/line connectivity to integrate consumer or professional audio devices into your Q-SYS system.
- Consistent tonal characteristics across the entire AcousticDesign™ family in both surface or ceiling applications
- Directivity Matched Transition® (DMT) waveguide ensures smooth, uniform frequency response over the coverage area
- Snap-fit magnetic grille
- 3x double stepped, long travel dog-ear blind mount system
- Advanced Intrinsic Correction™ voicings available via Q-SYS™
- Low-saturation and low-loss 70/100V transformers with 16Ω bypass
- Blemish-free removable logo
- Removable conduit cover plate, also available as accessory for pre-install wiring
- Available in black (RAL 9011) or white (RAL 9010)
- Complete EASE, CF2, CAD, & BIM information available online
Q-SYS network I/O processor
The Q-SYS Core Nano audio, video and control (AV&C) processor extends the applications of the Q-SYS Platform into a wider range of smaller-scale installations across corporate, higher education, healthcare and beyond. Built on the same foundational technologies and driven by the same Q-SYS OS as the rest of the Q-SYS processor portfolio, including the best-in-class Q-SYS Core 110f, Core Nano is designed for applications with lower network channel capacity and/or targeted processing requirements.
- 8-inch 2-way, 90° conical DMT™
- AD-C820 speaker baffle
- AD-C800BB Backcan assembly
- AD-C800RG Round grille (white, paintable)
he Roland S-2416 digital snake stage unit expands the line-up by offering a 24 input x 16 output analog and 8 input x 8 output digital, for a total of 32 input and 24 output channels. In addition to the analog and digital I/O the S-2416 has two REAC ports enabling the ability to cascade an additional snake for expanded I/O or for a fully redundant, zero-loss audio back-up solution. In addition, the discrete mic preamps are newly developed high-grade ensuring highest-quality uncolored sound.
2x Passive 8" Two-Way Loudspeakers &
Self-Powered, 10" Low Frequency Enclosure
Multi-Channel Amplifier
The MP-A Series music and paging amplifiers build on a 50-year legacy of amplifier dependability and quality. The MP-A Series offers an incredible amount of flexibility for business music and paging applications, while maintaining high efficiency and low total cost of ownership.
The direct-drive motor and precision quartz movement system delivers accurate pitch control and the overall feel that DJs can't live without. Heavy-duty, vibration-resistant construction is great for installation in professional nightclub DJ booths, as well as frequent touring and mobile applications. With additional features that include a sleek black steel finish, adjustable tone arm weights, anti-skate control, a pop-up target light, and a sliding pitch control, the SL-1210MK2 is a terrific choice for top DJs and beginners alike.
Power amplifier, Two-channel 2x 300 W 4 OHM
6.5" small format, surface mount loudspeaker
The white AcousticCoverage Series QSC AC-S4T is a pair of transformer-equipped 4" surface-mount loudspeakers voiced to deliver enhanced clarity in the vocal range, making them suitable for 70/100V or 8-ohm operation in a variety of paging, A/V conferencing, and background music applications.
Dual-capsule kick microphone with cable and case
- High quality transducers provide exceptional clarity through the critical voice range.
- Improved musicality often not seen in typical BGM class products.
- Ported baffle for increased low frequency extension down to 52 Hz.
- Low saturation 70/100V transformers with 8 ohm bypass.
- 4-pole Euroblock connector eases system wiring.
- Intrinsic Correction™ voicings available via Q-SYS Platform.
- White (RAL 9010).
- Complete EASE, CF2, CAD, & BIM information available online.
Q-SYS network + analog I/O processor
The Core 8 Flex audio, video and control (AV&C) processor extends the applications of the Q-SYS Platform into a wider range of smaller-scale installations across corporate, higher education, healthcare and beyond. Built on the same foundational technologies and driven by the same Q-SYS OS as the rest of the Q-SYS processor portfolio, including the best-in-class Q-SYS Core 110f, Core 8 Flex is designed for applications with lower network or analog channel capacity and/or targeted processing requirements.
The CD-01U is an extremely compact CD player available as a standard or professional version. The 19" casing of the CD-01U comprises a clearly legible display and durable CD drive buttons, a slot-loading drive which reads standard audio CDs (CD-R and CD-RW), as well as MP3-CDs with a diameter of 8 and 12 cm.
The QSC GXD 8 DSP PA Power Amplifier is a professional standard 2 x 1200 Watt at 4 Ohms Class D PA power Amplifier featuring onboard DSP filters, effects and EQ; ideal for pro PA installations.
LED Fresnel FC and Tunable White, to replace a 300W lamp
|
|
Cyclone 55.1 |
||
- Passive dual 5” two-way surface mount loudspeaker
- Compact fibreglass enclosure
- Non-resonant structure
- Wide dispersion pattern
- Marine-grade stainless steel fittings
- UV-resilient paint
- Weather-protected with an IP-55 rating (BS EN 60529:1992 +A2:2013)
|
|
Cyclone 2081 powered subwoofer |
||
- Powered loudspeaker with 600 W integrated amplifier module
- Two 150 W outputs (4 Ω) via Phoenix connector.
- 24 Bit, 48 kHz DSP with 4 onboard preset banks
- Compatible with Void speaker preset library and ArmoníaPlus software
- Combination XLR and ¼” jack inputs with Phoenix outputs
- Reflex loaded dual 8” low frequency loudspeaker
- Tough, high excursion transducers with 2” voice coil
- Stylised design in a low resonance fibreglass enclosure
Made from heavy duty Nylon/Cordura, the QSC KLA181 Cover is designed to protect your KLA181 subwoofer from dust, dirt, and moisture when not in use. The cover has hook-and-loop fastening flaps for accessing the built-in handles of the KLA181 for ease in transport.
Yoke mount for the AcousticDesign AD-S8T loudspeaker.
Robe's super fast ROBIN® LED Beam 100 is the ultimate effects lighting tool.
A highly optimized motorised control produces speedy pan and tilt movement, three LED zones allow the creation of various colour chases, and the extra punchy 7 degree beam angle can be amplified with fast strobing. Simplified control via pre-programmed of colours, colour chases and effects on a virtual colour wheel and various strobing and pulsing effects allow quick and easy programming.
Battery operated LED pixel batten
43-inch FULL HD LCD Display, brightness 350 cd/m2
7,000 lumens, WUXGA, DLP laser phosphor projector
- Great image quality
- Optimal integration capabilities
- Guaranteed service and support
Sold together with Barco R9801840 G-Lens (0,75-0,95:1)
Projector datasheet link provided below for detailed technical information about this product.
Console with monitor; Stage rack w/3DSP Mix Engine Cards, 48 analog mic/line in x 24 analog line out, ECx Ethernet Option card, FWx FireWire Option card, extra FOH Snake card. Plugins: VenuePack, McDSP Live, Waves Live
10" high performance 2-way active loudspeaker
12" high performance 2-way active loudspeaker
The Event Bar Q4 LED pinspot is an easy to use DMX controlled or Sound Active scanning system utilizing four quad color LED heads. With individual dimming and strobe, the Event Bar Q4 from ADJ provides superb lighting across a large area.
65-inch FULL HD LCD Display, brightness 350 cd/m2
This 1500 W moving head is the most impressive graphic effects spotlight available, with an incredible array of colour and imagery devices, including 20 gobos on 3 wheels, animation disc, rotating prism and the exclusive Automated-Star-Gobo (patent pending). All devices are fully combinable with limitless rotation and morphing possibilities. The zoom has an extreme aperture range from 7° to 57° (1:8 ratio) with an amazing 120 bpm speed. An auto-focusing function combined with the Dyna-Cue-Creator make programming and operation easy and creative. A special high definition iris, the advanced Zoom-Tracking-Diffuser and silent operation position Alpha HPE 1500 at the edge of show-lighting technology.
With a powerful engine built into a compact frame, this system is built for productions on the go.
Directional loudspeaker. Delivers focused sound dispersion perfect for one or two listeners. Speaker automatically monitors ambient noise and self-adjusts volume accordingly.
directional loudspeaker
Wash colour changers (2 pcs)
Set: Two DJ CD players together with transport case
Pair of flush mount 2-way installation loudspeakers with 4" driver
Bass combo with 4x10" drivers, 350W
