High-Power, 12-inch 2-way, 90˚ conical DMT™

The SPA4-100 four channel amplifier delivers 100 watts rms per channel into 4 or 8 ohms; the four channels can also be bridged in pairs, each pair providing up to 200 watts rms into 4 or 8 ohms. The SPA4-100 bridged pair channels can be switched into 70V or 100V direct drive mode providing up to 350 watts rms into a 70V or 100V output; when in 70V or 100V mode the 80Hz highpass filter is automatically engaged.

32 ch Digital Audio Console

Battery operated LED pixel batten

• Consistent tonal characteristics across the entire AcousticDesign™ family in both surface or ceiling applications
• Directivity Matched Transition^® (DMT) waveguide ensures smooth, uniform frequency response over the coverage area
• Snap-fit magnetic grille
• 3x double stepped, long travel dog-ear blind mount system
• Advanced Intrinsic Correction™ voicings available via Q-SYS™
• Low-saturation and low-loss 70/100V transformers with 16Ω bypass
• Blemish-free removable logo
• Removable conduit cover plate, also available as accessory for pre-install wiring
• Available in black (RAL 9011) or white (RAL 9010)
• Complete EASE, CF2, CAD, & BIM information available online

The robust UR1 Bodypack Transmitter, part of the Flagship UHF-R wireless series is the standard for professional performance and can be used with headworn, lavalier, instrument microphones, or with guitars or basses.

Multi-Channel Amplifier

The MP-A Series music and paging amplifiers build on a 50-year legacy of amplifier dependability and quality. The MP-A Series offers an incredible amount of flexibility for business music and paging applications, while maintaining high efficiency and low total cost of ownership.

The ADJ Mega Tripar Profile Plus is a compact, low profile par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique “sit-flat” design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear.

The Mega Tripar Profile Plus features 5 x 4-Watt, 4-N-1 RGB + UV LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGB + UV Dimmer Mode, Auto Run Mode, & Static Color Mode), and has 5 DMX Channel modes for a variety of programming options. Users can also use the ADJ LED RC wireless remote, which is sold separately, to control the Mega Tripar Profile Plus. 

• Suitable for the QSC K 12 and K 12.2

4.5-inch, 2-way, low profile, 150° conical DMT™

4.5-inch 2-way, 120° conical DMT™

KS118 CVR Transport Cover

2.75-inch Small Format Ceiling Satellite Loudspeaker

The AD-C.SAT is part of the AcousticDesign™ Series SUB/SAT loudspeaker solution, which is ideally suited for background music applications that require depth and clarity even at lower volume settings. The AcousticDesign Series SUB/SAT loudspeakers are specifically designed to be mix-and-match capable; meaning any combination of satellites may be paired with any subwoofer in the AD Series SUB/SAT line.

Bass combo with 4x10" drivers, 350W

Powered Line Array Loudspeaker 12-inch 2-way

The LA112 is a next-generation, intelligent, active line array loudspeaker featuring a brilliant combination of leading-edge innovation, refined engineering and unparalleled ease of use in an easy-to-deploy package.

Delivering extraordinary audio experiences and exceptional performance via system intelligence and premium components, the LA112 is the result of a deep understanding of customer needs and application requirements. The LA112 is easy to configure and deploy for applications ranging from simple, portable, plug-and-play setups, to demanding, networked, high-tech AV productions and fixed installations. Solo entertainers, installers and production companies will value its intuitive splay angle adjustment and array optimization, as well as its flexible interoperability with networked audio systems (Dante^®).

Deployed using dedicated array frame, ground-stacked (array frame combined with optional sub-stack adapters), or mounted using loudspeaker stand/pole, the LA112 loudspeaker also features daisy-chain connections for analog, digital audio and AC power (PowerCON TRUE1).

The Antari M-Series Stage Fogger is ideal for large concerts, movie production, fire training purpose and especially for touring applications, as well as any venue where ultimate performance, ease of use and dependability are specified.

VIDEO PROCESSOR

Column Surface-Mount Loudspeaker

The AcousticDesign™ Series AD-S402T is a 4-driver column surface-mount loudspeaker. This premium full range system is capable of 70 V / 100 V or 16 ohm bypass loads, making it ideal for a wide variety of foreground and background applications with acoustically challenged environments. Equipped with a unique pan/tilt mounting system, the column surface-mount loudspeakers offer multiple positioning locations allowing the loudspeaker to remain close to the wall while delivering up to -20° downward tilt.

• Innovatively designed metal housing in MIPRO’s distinctive aesthetic and ergonomic style.
• Basic sterling gray color with other custom-made colors optional.
• Turn upper housing for 2 AA battery installation and replacement.
• Interchangeable capsule module with premium condenser or dynamic options for easy and fast changeovers.
• The unique multi-layered metal grille protects the capsule against impact, rolling and pop noise, ensuring clarity of sound.
• Backlit LCD displays all operational parameter information.
• Five selectable gain settings with microphone input sensitivity of 0 dB.
• Switchable Manual /Disable audio mute options.
• Switchable High/Low power options.
• The bottom housing with built-in high-efficiency antenna features power switch, mute and setup buttons for programmable gain, limiter, low-cut and RF output power.
• Patented end-cap covers with color-coded channel identification clips. Detach the end-cap cover for parameter set-up.
• Reversible end-cap allows shielding of power on/off or mute switches during performance.
• High-efficiency circuitry design provides 12~14 hours of operation from 2 AA batteries (depending on the battery quality).

6.5-inch 2-way, 105° conical DMT™

4.5-inch, 2-way, 150° conical DMT™

The AcousticDesign™ AD-P4T is a 4.5-inch two-way pendant-mount loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16Ω bypass configurations.

he MP-A Series music and paging amplifiers build on a 50-year legacy of amplifier dependability and quality. The MP-A Series offers an incredible amount of flexibility for business music and paging applications, while maintaining high efficiency and low total cost of ownership.

• 4.5-inch weather treated woofer; 0.75-inch silk dome tweeter
• 120° conical DMT™ coverage
• 30 watt low-saturation and low-loss 70/100V transformer with 8Ω bypass
• Maximum peak SPL 110 dB (8 ohm bypass)
• Directivity Matched Transition^® (DMT) ensures smooth, uniform frequency response over the coverage area
• X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time
• Advanced Intrinsic Correction™ voicings available via Q-SYS™
• Lightweight ABS enclosures offer long-term durability and lasting good looks
• Sealed input panel cover and powder coated aluminum grilles for added weather resistance
• Meets IEC60529 IP-54 for dust and splash resistance
• Available in black (RAL 9011) or white (RAL 9010)
• Complete EASE, CF2, CAD, and BIM information available online

Digital audio console, 96kHz 

• Suitable for QSC CP8

Accessory Wall Mount Bracket for PTZ Camera, NC-12x80 and NC-20x60.    

Powered 12-inch 2-way loudspeaker

PAR Light for Event Lighting

Outdoor Cover

Features

• Power levels matched to the most popular speakers used by entertainers
• Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
• Inputs: XLR, 1/4-inch TRS and phono input connectors for compatibility with any source
• Outputs: Speakon® combo accepts, 1/4-inch (TS) plugs or Speakon 2-pole and 4-pole plugs (connects two poles only). Binding posts support all other speaker wiring systems
• Minimum depth chassis (10.1-inch / 257 mm) fits in compact, inexpensive effects racks
• Lightweight - GX3 and GX5 less than 26 lb (12.5 kg). GX7 only 15.5 lb (7 kg)*
• Detented gain controls for precise setting and matching of sensitivity
• GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
• Front panel LEDs monitor power, signal and clipping
• Subwoofer/satellite crossover built-in

* 230V 16.5 lb (7.5 kg)

Powder coated steel yoke for mounting the K8 vertically or horizontally to structures.

UR4D+ receivers are part of the flagship UHF-R system and provide single and dual-channel options for premium wireless. As "+"-versions these receivers include RF distribution ports that allow up to 10 receivers to share the RF signal from a single pair of antennas.

Multi-channel processing amplifier. Flexible Amplifier Summing Technology (FAST) drives most any loudspeaker system or configuration by distributing total amplifier power across one, two, three or all four channels.

Powered Line Array Loudspeaker 12-inch 2-way

The white AcousticCoverage Series QSC AC-S4T is a pair of transformer-equipped 4" surface-mount loudspeakers voiced to deliver enhanced clarity in the vocal range, making them suitable for 70/100V or 8-ohm operation in a variety of paging, A/V conferencing, and background music applications.

Powered 18-inch Flying Subwoofer

Steel yoke mount for the AD-S12 loudspeaker.

The SPA Series amplifiers from are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel into 4Ω and 8Ω. These amps can also be bridged to supply 200 watts into 4Ω and 8Ω, and up to 250 watts into 70V or 100V loads making them extremely flexible for Low-Z or High-Z applications. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality. The SPA2-60 and SPA4-60 are housed in an unobtrusive black painted 1/2 RU chassis with unique mounting hardware enabling rack, table and wall mounting capabilities.

Yoke Mount for QSC AP-5122 loudspeaker

• The unidirectional capsule unit reduces environmental noise, increases the S/N ratio and improves sound clarity.
• Clear and brilliant sound. High fidelity, wide range, high dynamic range, and rapid transient response for true natural sound reproduction.
• High dynamic range and low distortion.
• Standard MIPRO Mini XLR plug, and other plug types can be requested upon availability.

12-inch 2-way, 75° conical DMT™

Active 12" Subwoofer

6.5-inch, 2-way, 135° conical DMT™

The QSC GXD 4 Power Amplifier is designed for professional PA systems utilizing speakers with 4 and 8 ohm loads and a maximum output of 1600W.

Eight-channel Network Amplifier for the Q-SYS Platform

Q-SYS CX-Q Series network amplifiers combine a legacy of robust power amplifiers, advancements in high-efficiency output devices and native network transport, control and monitoring capabilities. CX-Q 4K8 features eight channels, capable of delivering customized power output loading and a total maximum power of up to 4000 W. Low-Z, 70 V or 100 V direct drive are available on all channels.

The SPA Series amplifiers from are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel into 4Ω and 8Ω. These amps can also be bridged to supply 200 watts into 4Ω and 8Ω, and up to 250 watts into 70V or 100V loads making them extremely flexible for Low-Z or High-Z applications. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality. The SPA2-60 and SPA4-60 are housed in an unobtrusive black painted 1/2 RU chassis with unique mounting hardware enabling rack, table and wall mounting capabilities.

Stormy CC innovates tradition since it uses the latest LED technology, but retains all the charm of a classic strobe. The light source is a strip of powerful RGBW LEDs. The flash effect is actually enhanced since the Stormy CC is equipped with a parabolic reflector, like a classic strobe, and does not project the light directly forwards like other LED strobes do.

Bi-amp, 2-way stage monitor (12")

he Roland S-2416 digital snake stage unit expands the line-up by offering a 24 input x 16 output analog and 8 input x 8 output digital, for a total of 32 input and 24 output channels. In addition to the analog and digital I/O the S-2416 has two REAC ports enabling the ability to cascade an additional snake for expanded I/O or for a fully redundant, zero-loss audio back-up solution. In addition, the discrete mic preamps are newly developed high-grade ensuring highest-quality uncolored sound.

• Ultra slim bodypack transmitter with sturdy magnesium alloy housing.
• On the top features mute switch, mini-XLR connector and antenna.
• Backlit LCD displays all operational parameter information.
• Innovatively designed battery cover allows easy access to operate buttons and prevents accidental operation.
• Mute button with remote-control jack for easy activation of mute function.
• Stable PLL circuits. Automatically synchronized with the receiver’s frequency by MIPRO’s patented ACT™ function.
• Can directly match to high-low input impedance for microphone or guitar without switching.
• The input sensitivity is adjustable with six selectable gain settings.
• Mini-XLR input with secure screw lock connector for lavaliere / headworn mics and guitar.
• Adjustable belt clip allows wearing transmitter in up or down position.
• High-efficiency circuitry design provides 12~14 hours of operation from 2 AA batteries (depending on the battery quality).

SCENA LED 80 CT is a compact, lightweight, DMX-controlled LED projector equipped with an  Tunable WHITE LED 2700 K ÷ 6000 K.

The Q-SYS™ Core 110f v2 processor provides a fully integrated audio, video and control solution for installations with a mixture of analog and network channels, supporting medium-sized rooms through the largest Enterprise scale deployments.