QSC AD-S8T-WH
- 8-inch weather treated woofer; 1.4-inch compression driver
- 105° conical DMT™ coverage
- 60 watt low-saturation and low-loss 70/100V transformers with 8Ω bypass
- Maximum peak SPL 119 dB (8Ω bypass)
- Directivity Matched Transition® (DMT) ensures smooth, uniform frequency response over the coverage area
- X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time
- Optional Yoke mount and M10 Kit-C for additional installation versatility
- Advanced Intrinsic Correction™ voicings available via Q-SYS™
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Available in black (RAL 9011) or white (RAL 9010)
- Complete EASE, CF2, CAD, and BIM information available online
| Effective frequency range1 | 55 Hz - 20 kHz |
| Rated noise power / voltage2 | 200 watts / 40 volts (rms) |
| Broadband sensitivity3 | 90 dB SPL |
| Coverage angle (-6 dB) | 105° conical DMT™ |
| Directivity factor (Q) | 7 |
| Directivity Index | 9 dB |
| Maximum continuous SPL4 | 113 dB |
| Maximum peak SPL4 | 119 dB |
| Rated impedance | 8 ohms |
| Recommended amplifier power (loudspeaker "program" power) |
400 watts |
| Transformer taps | 70 V: 60, 30, 15, 7.5 W and 8Ω bypass 100V: 60, 30, 15 W and 8Ω bypass |
| HF transducer | 1-inch exit / 1.4-inch voice coil compression driver |
| LF transducer | 8-inch weather resistant paper cone woofer 2-inch / 51 mm voice coil |
| Input connector type | Euroblock connector with parallel output terminals |
| Enclosure material | Painted ABS polymer |
| Grille material | Powder coated aluminum |
| X-Mount material | Powder coated aluminum |
| Enclosure Details | |
| Ingress protection | IP-54 |
| Operating environment | Designed for indoor and outdoor use |
| Testing | The AD Series loudspeakers qualified for outdoor use using the following tests:
|
| Net weight | 24.1 lb / 11 kg |
| Product dimensions (HWD) inches |
17.3 × 10 × 9.9 |
| Product dimensions (HWD) mm |
440 × 254 × 251 |
| Shipping weight | 32.1 lb / 14.5 kg |
| Shipping dimensions (HWD) inches |
24.3 × 13.8 × 13.8 |
| Shipping dimensions (HWD) mm |
729 × 351 × 351 |
| Included accessories | X-Mount mounting system, Euroblock connector, input panel cover |
| Optional accessories | YMS8T yoke mount, M10 Kit-C |
The SPA Series amplifiers from are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel into 4Ω and 8Ω. These amps can also be bridged to supply 200 watts into 4Ω and 8Ω, and up to 250 watts into 70V or 100V loads making them extremely flexible for Low-Z or High-Z applications. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality. The SPA2-60 and SPA4-60 are housed in an unobtrusive black painted 1/2 RU chassis with unique mounting hardware enabling rack, table and wall mounting capabilities.
The SPA4-100 four channel amplifier delivers 100 watts rms per channel into 4 or 8 ohms; the four channels can also be bridged in pairs, each pair providing up to 200 watts rms into 4 or 8 ohms. The SPA4-100 bridged pair channels can be switched into 70V or 100V direct drive mode providing up to 350 watts rms into a 70V or 100V output; when in 70V or 100V mode the 80Hz highpass filter is automatically engaged.
- Consistent tonal characteristics across the entire AcousticDesign™ family in both surface or ceiling applications
- Directivity Matched Transition® (DMT) waveguide ensures smooth, uniform frequency response over the coverage area
- Snap-fit magnetic grille
- 3x double stepped, long travel dog-ear blind mount system
- Advanced Intrinsic Correction™ voicings available via Q-SYS™
- Low-saturation and low-loss 70/100V transformers with 16Ω bypass
- Blemish-free removable logo
- Removable conduit cover plate, also available as accessory for pre-install wiring
- Available in black (RAL 9011) or white (RAL 9010)
- Complete EASE, CF2, CAD, & BIM information available online
he MP-A Series music and paging amplifiers build on a 50-year legacy of amplifier dependability and quality. The MP-A Series offers an incredible amount of flexibility for business music and paging applications, while maintaining high efficiency and low total cost of ownership.
The QSC MP-M music and paging mixers are fixed architecture mixer/processors offering unprecedented capabilities combined with ease of configuration and operation. The products are intended for retail and hospitality applications in which high-quality audio from various sources is routed to multiple zones. Live mixing functions are also supported for applications requiring reinforcement of entertainment, presentations or conferences.
